Main Content
    Home >> Support >>
11. What is power good and power fail signals and how can use it?
Add time:2017-08-02    Click:133
 
What is power good and power fail signals and how can use it?

                                                                                                                
Some power supplies provide a "Power Good" signal when they are turned on, and send out a " Power Fail" signal when they are turned off.
This is usually used for monitoring and controlling purpose.
Power Good: after the output of a power supply reaches 90% rated voltage, an TTL signal (about 5V) will be sent out within the next 10-500ms.
Power Fail: before the output of a power supply is less than 90% rated voltage, the power-good signal will be turned off at least 1ms in advance.

诚信网站