Why protocol compatibility needs a device list, not a label
It sounds reasonable on the surface. A universal charger would simplify inventory, reduce SKU count, and work for every customer regardless of what phone they carry. But the reality of fast-charge protocol implementation is far more complex than a marketing label suggests.

PD, QC, AFC, FCP. These aren't just different names for the same thing. They are fundamentally different signaling methods. Each one negotiates voltage in a completely different way, using different pins on the connector and different logic in the controller chip.
A charger can support multiple protocols — yes, that's technically possible. But here's what most buyers don't realize: each protocol requires specific hardware and firmware tuning. The controller IC must be programmed with the correct negotiation sequence for each protocol. The power stage must be designed to deliver stable voltage across the different profiles each protocol requests. The thermal management must account for the worst-case power delivery scenario across all supported protocols.
Adding a protocol isn't like flipping a switch. It's engineering work. Every extra protocol adds development time, validation effort, and potential points of failure.
Instead of asking "how many protocols does it support?", the smarter question is: "which protocols do my users actually need?" The answer depends entirely on your deployment scenario.
Your chargers sit in guest rooms. Guests arrive with whatever phone they own.
You need at least three to four protocols prioritized. PD covers Apple and newer Android flagships. QC covers Xiaomi and older Android devices. AFC covers Samsung. FCP covers Huawei. Anything beyond that is diminishing returns.
Your client issues the same phone model to every employee. Everyone uses the same device.
One protocol is enough. Adding unnecessary protocols only increases cost and complexity without delivering any user-facing benefit. The charger can be optimized for that one protocol — achieving faster charging speeds, better thermal performance, and lower cost.
Here's the difference between a charger that says "supports all protocols" and one that has been properly engineered for your use case.
This is not about cutting corners. It's about engineering precision. A charger that has been tuned for a specific set of devices will charge faster, run cooler, and have fewer compatibility issues than one that tries to cover everything and optimizes for nothing.
When you specify a charger for your next project, don't ask for "all protocols." Send your supplier the actual list of devices your customers will use. That single piece of information transforms a generic product into a purpose-built solution.